-
-
September 27, 2023 at 7:00 pmlouiee1907Subscriber
Hello,
I want to do aircraft's wing with 3g condition fatigue analysis in nCode DesignLife. I have acceleration-time almost 2000 datas. I know thank to nCode I can have PSD data from acceleration-time datas, but should I do vibration analysis before fatigue or acceleration condition is enough on wing model.
Static Structural (Add acceleration on aircraft's wing) - nCode Time Series Fatigue(Add acceleration-time datas)
Modal Analysis - Random Vibration Analysis - nCode Time Series Fatigue
How should I proceed to do this? I confused a bit. I try to see acceleration effect.
-
September 29, 2023 at 2:16 pmAshish KhemkaForum Moderator
Hi,
I think your query got answered here: Calculating Cycle (ansys.com)
If not then please let us know.
Regards,
Ashish Kumar
-
September 30, 2023 at 4:00 amlouiee1907Subscriber
Yes, my problem was solved
-
-
- The topic ‘Fatigue Analysis’ is closed to new replies.
- How to apply Compression-only Support?
- At least one body has been found to have only 1 element in at least 2 directions
- Error when opening saved Workbench project
- Geometric stiffness matrix for solid elements
- Script Error Code:800a000d
- Timestep range set for animation export
- Image to file in Mechanical is bugged and does not show text
- Elastic limit load, Elastic-plastic limit load
- Element has excessive thickness change, distortion, is turning inside out
- BackGround Color
-
1602
-
602
-
599
-
591
-
366
© 2025 Copyright ANSYS, Inc. All rights reserved.