-
-
February 16, 2022 at 10:11 am
Parvathy
SubscriberDear All,
I did the post processing in Space Claim and I need an STL file for 3D printing. I have seen that in Mechanical, we can get the stl file from the Topology Design. But I need the STL file of the post processed design. Can someone help me ?
February 16, 2022 at 12:44 pmpeteroznewman
SubscriberIf you are using the free ANSYS Student 2021 or 2022 license for SpaceClaim, there is no ability to Save As STL. If you are using a full paid license, then you can Save As STL and a long list of other formats.
Viewing 1 reply thread- The topic ‘Exporting STL file’ is closed to new replies.
Ansys Innovation SpaceTrending discussionsTop Contributors-
3467
-
1057
-
1051
-
929
-
896
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-

Ansys Assistant

Welcome to Ansys Assistant!
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.

Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY