We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Innovation Space

FREE STUDENT SOFTWARE

Error in velocity calculation of descrete phase model

- December 27, 2024 at 11:36 am
  
  me22d077
  Subscriber
  
  In this simulation as shown in the figure I have given flow rate of 0.00382 kg/sec and Outer radius 0.305e-03mm then according to the continuity equation I shouldve got partcle velocity vector as 13.11 m/s also the paper Im validating has the same velocity obtained. Please guide me regarding this.
- January 7, 2025 at 5:25 pm
  
  Prashanth
  Ansys Employee
  
  Hi,
  From what I understand from this, you have set a flow rate value, then area (radius) and expect the maximum particle velocity to be 13.11 m/s and not 7.9 m/s. Is that right?
  - January 8, 2025 at 5:19 am
    
    me22d077
    Subscriber
    
    Yes Sir

Viewing 1 reply thread

You must be logged in to reply to this topic.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK