TAGGED: ansys-forte
-
-
July 11, 2024 at 11:26 am
-
July 11, 2024 at 7:53 pm
Usman
SubscriberCan anyone please let me know?
-
July 15, 2024 at 2:09 pm
Rob
Forum ModeratorWasn't this covered in another thread? We're still clearing up from the downtime and it looks like the same model to my (untrained) eye.Â
-
July 15, 2024 at 2:12 pm
Usman
SubscriberDear Rob,
Â
it was not covered in the previous thread. I am encountering error at the time of injection here. Previous questions were something else. Thank you!
-
July 16, 2024 at 1:13 pm
Ren
Ansys EmployeeCan you show more lines above the first warning message? You can copy and paste the text here.
Â
-
July 16, 2024 at 1:58 pm
Usman
SubscriberUnfortunately, I did not save those simulations. However, error happened at the time of fuel injection. I created this model on Solidworks and then imported it to spaceclaim as a parasolid file. I did all the name selection here and then exported as a .tgf file which was then imported into forte.
Â
i have also tried using AMG but it gives another kind of error which I posted the same day I posted this thread. It is well and good if AMG starts working (then I will not need to create a model on Solidworks). Could you please check that thread for me?Â
-
July 17, 2024 at 1:25 pm
Ren
Ansys EmployeeThere is not enough information here to help diagnose the issue. Please refer to the following documentation:
Ansys Forte Quick Start Guide
Simulating Dual Fuel Combustion tutorial
Ansys Forte Best Practices guide
Please also refer to my post in the other thread.
Â
-
July 18, 2024 at 11:59 am
Usman
SubscriberCan you please look at my following thread of AMG:
https://innovationspace.ansys.com/forum/forums/topic/sector-mesh-generator-2/ -
July 22, 2024 at 1:33 pm
Rob
Forum ModeratorContinues here  https://innovationspace.ansys.com/forum/forums/topic/sector-mesh-generator-2/Â
-
- The topic ‘Error in the Mid of the simulations’ is closed to new replies.
-
3377
-
1052
-
1050
-
886
-
842
© 2025 Copyright ANSYS, Inc. All rights reserved.