We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. Entrance parameterization using a 1/4 grid

Entrance parameterization using a 1/4 grid

    • March 14, 2024 at 2:38 am
      Stemphanie_anansu
      Subscriber


      Already know the total flow rate m for the two small, perfectly symmetrical inlets pointed to by the arrows, now do the calculation using a 1/4 grid. Should I enter the flow rate of m or 1/4*m at the position of the red circle?

      Thanks!

       

    • March 19, 2024 at 7:42 am
      Essence
      Ansys Employee

       

       

      Hello,

      Yes, you can apply 1/4 of the mass flow rate at the inlet, provided you have symmetry BC applied.

       

       

      • March 19, 2024 at 2:00 pm
        Stemphanie_anansu
        Subscriber

        got it 

        thank you

Viewing 1 reply thread
  • The topic ‘Entrance parameterization using a 1/4 grid’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.