We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Photonics

Photonics

Topics related to Lumerical and more.
  1. All Channels
  2. Photonics
  3. EME profile monitor

EME profile monitor

    • February 20, 2023 at 7:57 am
      Valer TOSA
      Subscriber

      Hello,

      I try to extract transmission from an EME profile monitor but the answer is that no d-card is available. How can I solve this problem?

      Thanks,

      Valer Tosa

    • February 21, 2023 at 6:44 pm
      Amrita Pati
      Ansys Employee

      Hello Valer,

      The EME profile monitor collects the E and H fields so, you won't be able to obtain the transmission values from it. The transmission and reflection are automatically calculated and can be obtained from "user s matrix". For more information, please refer to the following video:

      https://optics.ansys.com/hc/en-us/articles/360045466773-Running-and-Analysis-Propagating-Interpreting-S-Matrix

      It is also important to note that the function "transmission" can only be used in FDTD and varFDTD.

      Thank you.

Viewing 1 reply thread
  • The topic ‘EME profile monitor’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.