EME field profile doesn’t record the whole simulation.

- July 5, 2024 at 11:08 am
  
  Vahram Voskerchyan
  Subscriber
  
  I have setup MMI simulation following the knowledge base and here is the setup:
  
  But for some reason my monitor doesn't record the specified range. And only record from -3e-6 to 3e-6 in y direction and -8e-6 to 8e-6 in x direction.
  While the monitor actual size is 26 microns for x span and 11 microns for y span.
  
  Resizing the plot doesn't change anything
- July 9, 2024 at 7:17 am
  
  Amrita Pati
  Ansys Employee
  
  Replied in:
  Monitor doesn't record the full data in EME
  Closing this post.