General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Directional Deformation

Directional Deformation

    • May 5, 2020 at 8:57 am
      jescalante1971
      Subscriber

      Hello.


      I am working in my assignment where I have to create a bridge and compare the deflection result in ANSYS with my results .I did my hand results comparing the bridge as a simply supported beam with UDL.


      When I finish all the process and click "Solve", Ansys gave me a results for Directional Deformation and showed the base of the bridge in different colours from Max and Min.  the results were different. I have to explain why in my assignment.


      My question is: I did all the process again to take some screenshots for assignment and now when I check the results of deformation the base of the bridge is only in colour green. could you tell me how to change this, please?

Viewing 0 reply threads
  • The topic ‘Directional Deformation’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.