We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Creation of a sub-model from a non-converged global model

Creation of a sub-model from a non-converged global model

TAGGED: , ,

    • July 20, 2021 at 1:56 pm
      aleM2
      Subscriber

      Good afternoon,

      I am doing a static structural non-linear material and geometry analysis and my simulation converged until the 3rd load step.

      I would like to perform a sub model taking the results from one of the converged steps but I do not manage to create the link between the global model and the sub-model. Is there a way to create the sub-model even if the global model is not entirely completed?

      Thank you in advance for your help!

    • July 23, 2021 at 2:45 pm
      Ashish Khemka
      Forum Moderator


      You can try importing the displacements from the result file (.rst file):


      Regards Ashish Khemka

Viewing 1 reply thread
  • The topic ‘Creation of a sub-model from a non-converged global model’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.