-
-
October 4, 2017 at 12:20 pm
pgl
Ansys EmployeeIs "Circumferential Divisions" available for tetrahedron elements for Semi-Elliptical ?
-
October 17, 2017 at 10:16 am
Arun
Ansys EmployeeCircumferential Divisions are available only when user chooses Hex Dominant method for Semi-Elliptical Crack definition. If tetrahedron mesh is chosen, crack front divisions are defined via crack front size and circumferential divisions are not required for this method.
-
Viewing 1 reply thread
- The topic ‘“Circumferential Divisions” available for tetrahedron elements for Semi-Elliptical ?’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- How to model a bimodular material in Mechanical
- APDL, memory, solid
- Meaning of the error
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors
-
3907
-
1414
-
1256
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.