cfd post problem

- September 27, 2019 at 7:14 am
  
  vukani
  Subscriber
  
  Good day, I need help with cfd post results. My geometry, mesh ,setup and results seemed to be fine, but when I run cfd post I get the blank window. I tried most of the things suggested like closing other files and unistalling and reinstalling the 2019R2 sofware(student version), but I didn't win. I spent a lot of time trying to learn ansys but my time seems as if was wasted as it is not helping me. I saw most people struggle with this software at this stage. Any help please, or is the any software which is like this which doesn't give problems. Thank you
- September 27, 2019 at 1:24 pm
  
  Rob
  Forum Moderator
  
  As you're running Fluent I'd advise using the Fluent Post processing anyway: CFD Post isn't really used for Fluent beyond about R19, but is available if you want. Have a look in the installation section on here for black screens: it's probably graphics card related.
- September 27, 2019 at 8:52 pm
  
  vukani
  Subscriber
  
  Thanks Rwoolhou, I will have to try it on another computer if the problems is because of graphics. If you say CFD Post is not used for Fluent beyond R19, so what can I use to simulate fluid flow for my assignment?