Learning Forum

[a01284788]

I'm having trouble with ansys cfd post. This didnt' happen before, i tried uninstalling, erasing all the files and installing it again 3 times. I searched many forums but haven't found a solution. I tried opening cfd post alone without the workbench and it does open. However when i click edit or refresh it gives me this types of error. Hope someone can help me.

[VG]

The solution is as given below:
Close all Ansys/Fluent/CFd-Post/Work-bench  applications

Check for the following files:
"C:\Windows\System32\libcrypto-1_1-x64.dll"
"C:\Windows\System32\libssl-1_1-x64.dll"

If they exist, please try renaming them to:
"C:\Windows\System32\libcrypto-1_1-x64.dll.safe"
"C:\Windows\System32\libssl-1_1-x64.dll.safe"

Restart machine and re-check in the folders , if the files reappeared. If yes, repeat the above task.
This should help.

[a01284788]

Thank you so much for the solution. It did work. Here I atach the images.

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update. 

[VG]

Thank you for the update.