TAGGED: 2d-analysis, 2d-axisymmetric, eulerian, eulerian-lagrangian
-
-
April 24, 2024 at 4:32 pm
Mohamed Obeid
SubscriberHello everyone, I'm trying to perform a simple 2D axisymmetric analysis in mechanical. Everything works fine until I'm trying to obtain the 3D version of the total velocity (or any variable) with symmetry. The mechanical suddenly crashed for some reason with no error messages. I managed to obtain the same error with the following trivial analysis
Is this not allowed for Eulerian frames? Because the symmetry works fine with Lagrangian frames. Will appreciate any help, thanks in advance.
-
April 25, 2024 at 8:53 am
Erik Kostson
Ansys EmployeeHello
Â
I would suggest to post this in the LS-Dyna (Autodyn) forum.
/forum/forums/forum/discuss-simulation/ls-dyna/
All the best
Â
Erik
-
Viewing 1 reply thread
- The topic ‘Can’t use symmetry with Eulerian frame’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors
-
3867
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.