We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Calculation of a rectangular section frame

Calculation of a rectangular section frame

    • March 23, 2025 at 9:39 am
      javat33489
      Subscriber

      Hello everyone. I am going to calculate a large wooden structure made of timber and boards. This is a building frame.
      All boards are joined by bonded contact. All boards are rectangular in section and in the corners of the section at the point of contact there may be increased non-physical stresses.
      1. How to reduce them?
      2. Can I make a midsurface for all boards? Where the board lies on the board I will make perpendicular sections. Such elements are safer for non-physical stresses and singularities.


      Please give your advice?

    • March 25, 2025 at 11:39 am
      Ashish Khemka
      Forum Moderator

      Hello,

      Please see if the following links help:

      Tips for dealing with stress singularity. | Ansys Knowledge

      Assessing stress singularity| Ansys Innovation Courses

      Regards,

      Ashish Khemka

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.