Learning Forum

[NGO NAM]

I have a fluid dynamics simulation exercise with boundary conditions here

I have a question about the pressure part, like the pressure/wall is the pressure I set at the operating condition, right?
And do I need to add pressure to the outlet when the pressure is the same as the operating condition?

[SRP]

Hi,

All pressures that you specify and all pressures computed or reported by Ansys Fluent are gauge pressures. You can check ansys user's guide: 8.14. Operating Pressure (ansys.com)

You can put zero pressure at outlet.

Thank you.

[NGO NAM]

Thank you