We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Boundary condition

Boundary condition

TAGGED: , , , ,

    • September 21, 2024 at 10:43 am
      216164002
      Subscriber

      All faces of 3D workpiece model, except the top surfaces, are assigned to be the adiabatic boundary condition.

       

      I am doing thermal analysis. How can I enter the boundary condition I mentioned into the system?

    • September 23, 2024 at 6:42 am
      Erik Kostson
      Ansys Employee

      Hi

       
       
      Adiabatic (or perfectly insulated) is the default condition where no boundary condition is 
      applied.
       
      All the best
       
      Erik
Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.