-
-
November 2, 2023 at 2:03 pm
Muhammad Zeeshan
Subscriber -
November 2, 2023 at 2:08 pm
Sampat Kumar
Ansys EmployeeHi Muhammad,
Kindly upload your query once more; it appears that there might be a problem with the upload.
Regards,
Sampat -
November 2, 2023 at 2:27 pm
Erik Kostson
Ansys EmployeeÂ
Closing this post – use this one instead:
/forum/forums/topic/boundary-condition-for-simply-supported/
Erik
Â
-
Viewing 2 reply threads
- The topic ‘Boundary Condition’ is closed to new replies.
Innovation Space
Trending discussions
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- Meaning of the error
- How to model a bimodular material in Mechanical
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
- Contact stiffness too big
Top Contributors
-
4212
-
1493
-
1375
-
1197
-
1021
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.