-
-
February 21, 2023 at 10:46 am
Sebastiano Santarpia
SubscriberI need to boost my fem simulation time on icepack, . How anyone give me any tips if is it possible to share simulations between different machines that are on the same lan?
-
February 27, 2023 at 7:10 am
Pdev
Ansys EmployeeHello Sebastiano,Â
You may consider using HPC to speed up the processing. Please refer to the following link for AEDT Icepak :Â HPC link
For Classic Icepak, please use Parallel Processing : Parallel Processing.Â
Thank you,Â
Pdev
-
Viewing 1 reply thread
- The topic ‘boost icepack simulation..’ is closed to new replies.
Innovation Space
Trending discussions
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- Three-Phase Voltage Imbalances in dual stator electric generator
- Co-simulation in Q3D, Icepak – meshing problem
- Classic Icepak – clarifications on Boundary condition
- Link the Circuit to 3D Terminals
- Rectangular Coil in Maxwell for WPT using solid block
- Magnetic Dipole moment calculation
- Integration lines or U Axis Line for circular and rectangular ports
- (HFSS) Surface Current on Microstrip Shows Impossible Current outside of Trace
Top Contributors
-
4527
-
1494
-
1386
-
1209
-
1021
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.