Learning Forum

[志 王]

[Ingrid M]

Hello,

The image you posted doesn't say much about your workflow.

As part of the Aqwa workflow, you want your first analysis component to be an Hydrodynamic Diffraction system. This system can be connected to a geometry/mesh-related upstream component to your model or geometry cells. Then you can only connect a series of Hydrodynamic Response systems. Do do this, drag and drop your Hydrodynamic Response component over the solution cell (this will highlight 3 cells of your HD system). You can connect a Mechanical Static Structural system to a HD or HR system in order to transfer the hydrodynamic pressure load (your Aqwa solution is connected to the Mechanical setup cell). You will need to make sure you ACT load mapping extension is loaded and that you've updated your Aqwa solution (right click on Solution > Update) in order to transfer your Aqwa files. Make sure Mechanical is closed at the time you do this.

I hope this helps,

Ingrid

[一博 田]

Hello, I would like to ask if it is possible to set up a structure completely above the water surface in aqwa

[nhanani4]

Hi,
I do ansys aqwa and get this error (reading deck 18). I see in the manual it said printing option error. What is the printing error and how can I solve it? For my research, I want to get the force action at the connector connecting a modular floating structure.

[Ingrid M]

 

Hello,

you will need to describe a little bit more how you setup your project before launching the run so we can better help you.

It seems like the solve doesn’t even work on your end. 

If you have a connection points or a joint, you can extract the force (and other results type) at its location when you look at the graph results.

Kind regards,

Ingrid

#------------------------------ !! Attention !! --------------------------------

I am amending my initial reply as this question is posted in a different thread and is unrelated to the current one.

You can find a more comprehensive reply here:

how to solve error (reading deck 18)in ansys aqwa?