General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Application of User Programmable Feature in ANSYS 2019 R1 version

Application of User Programmable Feature in ANSYS 2019 R1 version

TAGGED: 
    • June 17, 2023 at 1:57 am
      JooJaehoon
      Subscriber

      I get User Programmable Features V4 from ANSYS App Store

      By the way, looking at the applicable version, it was listed as applicable from 17 to 19.2.

      My version is 2019 R1 (19.3) version.

      Is it not possible to apply UPF other than the version specified in the Ansys App Store?

      If applicable, I would appreciate it if you could send me how to implement it and a simple example code.

      Also, if there is a site or material where you can study UPF basic commands, it would be appreciated if you share it.

    • June 19, 2023 at 1:56 pm
      Ashish Khemka
      Forum Moderator

      Hi,

       

      Please refer to the following links:

      Chapter 1: Understanding User-Programmable Features (UPFs) (ansys.com)

      How to access the ANSYS Online Help

      Regards,

      Ashish Khemka

Viewing 1 reply thread
  • The topic ‘Application of User Programmable Feature in ANSYS 2019 R1 version’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.