-
-
February 22, 2023 at 7:09 am
Vinay_G
SubscriberHello,
How can I connect the star connection of induction motor to the neutral in the ansys maxwell? -
February 28, 2023 at 2:17 pm
NKC
Forum ModeratorHi Vinay,
To define a Y-connection:
1. Click Maxwell 2D (or Maxwell 3D)>Excitations>Setup Y Connection.
The Setup Y Connection dialogue appears.
2. In the Winding list on the left, select the windings to be grouped into a Y connection.
3. Click the Group button to create a Y Connection group with the selected windings.
4. Click OK when all required grouping have been created.You can refer to the "Setting Up a Y Connection in 2D and 3D Transient Designs" section in Maxwell help
Regards,
Navya
-
Viewing 1 reply thread
- The topic ‘Ansys Maxwell STAR TO NEUTRAL CONNECTION’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
Top Contributors
-
3882
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.