Ansys Innovation Space

FREE STUDENT SOFTWARE

Ansys Fluent – Question About Simulating Well-Mixed Space with a Single Cell

- November 21, 2023 at 3:12 pm
  
  Tong Lin
  Subscriber
  
  Hello,
  
  I have a technical question regarding Ansys Fluent. I'm wondering if it's possible to work with just a single cell and specify boundary conditions to simulate a well-mixed space?
  
  I would greatly appreciate your insights on this matter.
  
  Thank you,
- November 21, 2023 at 3:54 pm
  
  Rob
  Forum Moderator
  
  Not really, as there's not enough mesh to calculate the gradients. Given the 2d option and modern cpu you can probably do it properly in a very short time!
  - November 21, 2023 at 4:06 pm
    
    Tong Lin
    Subscriber
    
    Thank you for your response. This information is greatly appreciated.

Viewing 1 reply thread

The topic ‘Ansys Fluent – Question About Simulating Well-Mixed Space with a Single Cell’ is closed to new replies.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK