We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

ANSYS Classic, Transient Analysis: Can I view the results every 0.001s instead of 0.004s?

- November 20, 2020 at 3:01 pm
  
  mirjam_helga
  Subscriber
  
  Hello,I'm doing a transient analysis in ANSYS Classic with a time step size of 0.001 s. However when I list the results (e. g. deformation uy by time) (command:PRVAR) the results (of e. g. uy) are shown in time step sizes of 0.004 s. Is there a way to show the results every 0.001 s instead of every 0.004 s?n(So e. g.:t = 0 --> uy = 45; t = 0.001 --> uy = 50; t = 0.002 --> uy = 55)nThanks a lot in advance.nMirjamn
- November 23, 2020 at 5:56 pm
  
  Ashish Khemka
  Forum Moderator
  
  Hi Mirjam,nnPlease have a look into the example below:nnnRegards,nAshish Khemkann

Viewing 1 reply thread

The topic ‘ANSYS Classic, Transient Analysis: Can I view the results every 0.001s instead of 0.004s?’ is closed to new replies.