-
-
July 31, 2024 at 6:21 amScott BlackBbp_participant
I am having issues with the full cure simulation workshop that can be accessed through the learning hub in under ACCS. I have tried by solving according to the intructions and even by downloading an already completed version of the problem but it will not solve either way. The one that is made by ansys returns an error that can be seen in the image here
What is the issue causing this and how would I adress it?
Thank you
-
August 6, 2024 at 7:41 amAshish KhemkaForum Moderator
Hi Scott,
Can you please provide the following details?
- What version are you running?
- Which Analysis system are you trying to solve - if you can share a snapshot from the project schematic page then it might be helpful?
Regards,
Ashish Khemka
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Battery Simulation – Cannot access User-defined scalar (UDS) diffusivity
- ANSYS Advanced Composite Cure Simulation full simulation Workshop issues
- Regarding the modal analysis of the hyperelastic material
- Applying the User Programmable Features for User Defined Material Model
- acoustic structure coupling
- Doubt clarification on seed generation using ANSYS ADPL
- S-N (Wohler Graph) for steel X153CrMoV12 / D2 / NC11LV / K110 or similar
- Force free Boundary Condition
- Material Designer: Meshing difficulties
- Damping
Top Contributors
-
421
-
192
-
178
-
161
-
140
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.