We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Ansys ADPL – Batch Mode

Ansys ADPL – Batch Mode

    • May 10, 2022 at 12:28 pm
      AnhDung_TRAN
      Subscriber

      Hello every one,

      I am currently working on Ansys ADPL using batch mode through MATLAB.

      The structure is a single DOF pendulum with COMBIN39. The command

    • May 11, 2022 at 3:56 am
      mrife
      Ansys Employee
      Please post the contents of the output file. What is the error if any. What is the MAPDL command line that Matlab is issuing?
      I've found that most issues with Matlab is the environment i.e. Matlab (or its configuration) is setting some environment variable that is conflicting with MAPDL. Knowing the error, if any, will help to narrow down the issue.
      Mike
Viewing 1 reply thread
  • The topic ‘Ansys ADPL – Batch Mode’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.