We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. ansys additive microstructure simulation

ansys additive microstructure simulation

TAGGED: , , , , ,

    • May 19, 2024 at 12:11 pm
      n n
      Subscriber

      hello,

      how the grain orientation is measured in ansys additive ? what is the solidifcation model used ?

    • May 21, 2024 at 5:50 am
      Ashish Khemka
      Forum Moderator

      Hi,

      Grain orientation in Ansys Additive is measured using Microstructure Simulation, which can provide insights into the grain orientation in the part produced using different process parameters such as laser power, speed, scan pattern, hatch spacing, powder layer thickness, etc. 

      https://ansyshelp.ansys.com/Views/Secured/corp/v232/en/add_print/add_print_as2dm_mech_props.html

       

      In addition, please refer to the following forum thread: microstrcture solver in ansys additive science

      Regards,

      Ashish Khemka

Viewing 1 reply thread
  • The topic ‘ansys additive microstructure simulation’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.