Adaptive region based meshing issues

- July 4, 2024 at 10:59 am
  
  Keith Sequeira
  Subscriber
  
  I’m using region based meshing to model jet blast into a domain. I’ve used hexagon region based meshing and have observed while I do get refined results in the regions of interested, I loose temperature information on the ground along with observing a temperature obstruction. The domain has no obstructions whatsoever. Regarding the lower wall of the domain ( ground) I do not get any temperature information here
- July 4, 2024 at 12:58 pm
  
  Rob
  Forum Moderator
  
  How is the covergence looking? What causes the cold spot in the middle of the domain?