Ansys Innovation Space

FREE STUDENT SOFTWARE

2024 R1 Student License Error

- July 11, 2024 at 3:12 am
  
  wooju jeon
  Subscriber
  
  An error occurs when using the ls-dyna student license version.
  Edit - thread tidy Rob
  How to use WB LS-DYNA with Student License?
  I installed the ANSYS 2024 R1 student version
  With LS-DYNA Student License.
  When I run Mechanical using WB and try to use LS-DYNA, I get an error regarding the installation path.
  Messages:
  'An error occurred inside the SOLVER module: general error.'
  'The demanded solver was not found in the specified path.'
  C:\Program Files\ANSYS Inc\ANSYS Student\v241\ansys\bin\winx64 : There are no LS-DYNA files in this path
  I copied the Winx64 file from the LS-DYNA license computer and replaced the existing file.
  Because LS-DYNA training solved the same problem in this way.
  But it doesn't work on my student account.
- July 15, 2024 at 12:12 pm
  
  George Karnos
  Ansys Employee
  
  If you are using the Free Student version, did you install the LS-DYNA Student version:
  Ansys Student Versions | Free Student Software Downloads
- July 16, 2024 at 6:37 am
  
  wooju jeon
  Subscriber
  
  Yes, I installed it.
  I'm using LS-prepost. But if I can, I'd like to interpret it in Mechanical in WB environment and see the results.
- July 17, 2024 at 1:27 pm
  
  vganore
  Ansys Employee
  
  LS Dyna under Workbench/Mechanical is currently not supported in the student version. You need to use standalone version of LS Dyna available here:
  Ansys LS-DYNA Student Version | Ansys

Viewing 3 reply threads

The topic ‘2024 R1 Student License Error’ is closed to new replies.