TAGGED: #fluent-#ansys, 2-fsi, 2-way-coupled-fsi, ansys-cfx
-
-
November 25, 2024 at 6:35 am
akm019
SubscriberI am facing some errors during system coupling. In mechanical convergence criteria satisfied from 1st iteration, but in CFX convergence criteria satisfied after 4 iteration, and then convergence criteria satisfied both domains. After that, the program shows error and stops. Please help me to find out error.
Â
-
November 26, 2024 at 9:49 am
Rob
Forum ModeratorSee https://innovationspace.ansys.com/forum/forums/topic/2-way-fsi-problem/Â Â
Moderator comment: Double posting is not appreciated.Â
-
Viewing 1 reply thread
- The topic ‘2 way FSI Problem’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- APDL, memory, solid
- Convergence error in modal analysis
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Real Life Example of a non-symmetric eigenvalue problem
- Nonlinear load cases combinations
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors
-
3862
-
1414
-
1220
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.