-
-
November 20, 2023 at 2:35 pm
Ashkan Lazemizadeh
SubscriberHello every body,I would like to find out the transferable torque between 2 rings that are at a distance of 0.001 mm(as lubricant) from each other. One is fixed and one rotates with 1500 rpm. I have set pinballs with radius .0015 mm in a frictional contact with 0.1 as friction factor. I also set a damping factor of 0.05 under "Adjust to Touch", with turned on "weak springs", but I am not sure, if these are correct. I could not also find out a specific transmitted torque.Could you please suggest a compatible set up?Thanks. -
November 22, 2023 at 3:01 pm
Ashish Khemka
Forum ModeratorHi,
Try using a transient analysis without weak springs and see if there is a moment reaction at the fixed end.
Regards,
Ashish Khemka
-
Viewing 1 reply thread
- The topic ‘2 Rings simulation in static structure’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors
-
3882
-
1414
-
1241
-
1118
-
1015
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.