We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Preprocessing

Preprocessing

Topics related to geometry, meshing, and CAD.
  1. All Channels
  2. Preprocessing
  3. 1e-6m meshing

1e-6m meshing

    • June 3, 2024 at 5:49 pm
      Zwernjayden
      Subscriber

      I need one surface to be 1e-6m, and the rest to be 1e-4m. The geometry is a approximatly a .5mx.05m rectangle. It has been meshing for 24h and won't get past 5%. Is there something wrong or if I leave it long enough will it finish

    • June 3, 2024 at 7:14 pm
      Rob
      Forum Moderator

      If you do a quick hand calc how many cells are you going to get at that resolution?  If you're in Ansys Meshing there is a cap on surface facets to prevent the algorithms running away but I'm not sure what that value is now: it used to be around 100k cells.

Viewing 1 reply thread
  • The topic ‘1e-6m meshing’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.