We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum Forums Discuss Simulation General Mechanical Coupled field transient of brakedrum Reply To: Coupled field transient of brakedrum

engr.rohan7
Subscriber

 

Hello Peter,

I have a doubt regarding the 4 steps mentioned above regarding application of rotational velocity as joint load. Since we are dealing with deceleration due to braking, initial condition will be, at t= 0s, rotational velocity is x rad/s, and after braking at t= 2.5s rotational velocity is 0.

Why can’t we take the actual rotational velocity at t= 0s instead of ramping from 0 to given rotational velocity through a span of say 0.1s?

Regards 

Rohan.