Ansys Learning Forum › Forums › Installation and Licensing › Ansys Products › No Influence of Force on Bearings in Transient Structural › Reply To: No Influence of Force on Bearings in Transient Structural
October 25, 2024 at 1:57 pm
Ansys Employee
No, just the opposite. An applied displacement usually produces a very large stress. In a cylindrical body an applied radially displacement will produce a large hoop stress proportional to displacement/radius and the elastic modulus. If you apply the radial displacement at the inner radius, some of it may be lost at the outer radius. An examination of the contact status may offer an explanation.