Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Issue with Fluctuating Moving Torque in ANSYS Maxwell 2D transient Simulation › Reply To: Issue with Fluctuating Moving Torque in ANSYS Maxwell 2D transient Simulation
October 22, 2024 at 8:35 am
Subscriber
I have used transient cosimulation using twinbuilder to obtain torque using current sources at rated current at rated speed of 3000 rpm. However the motor is not producing rated torque. The torque produced was 4.36 Nm while the rated torque is 11.87 Nm. Please let me know how to resolve this to produced rated Torque. The Rmxprt result for the motor shows 11.87 Nm full load torque