We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Value of link parameter ‘endRegion’ is NOT defined in Workbench › Reply To: Value of link parameter ‘endRegion’ is NOT defined in Workbench

October 12, 2024 at 6:28 am
agyepes
Subscriber

Hello MirandaH,

I am working on a coupled simulation between Ansys Maxwell 3D and Ansys Fluent using Ansys Workbench, while Ansys Discovery is used for adjusting the geometry. In the first place, I create an RMxprt model. From it, I create automatically a 3D Maxwell model, which already includes this "EndRegion" parameter by default, although I don't know what it means. Then, I export the geometry to Discovery using Workbench and I modify it. Then, I export this geometry from Discovery to a new Maxwell 3D model. Then, I simulate this new Maxwell 3D model (which gives the warning I mentioned) and I export the resulting losses to Fluent. I have 2 questions:
1) What is this parameter "endRegion" used for?
2) How can I solve this warning?