Reply To: Error: An error occurred when post processor attempted to load a specific result

[bram.dupre]

Hi Reno,

I use 200 steps because I would like to replicate the pulsing curve of the YouTube tutorial:

However, I tried to solve a fully resetted Explicit Dynamics, changed the end time and set the # of steps to 1 in the default Analysis Settings. This is a screenshot of the Solution Information of my new simulation:

Note I added the Total Deformation again afterwards and evaluated the result. I had no errors without the "results", but that is expected.

I found an error in the stdSubmit.log that might be related to the issue, but was not able to solve it yet:

Running Solver : C:\Program Files\ANSYS Inc\ANSYS Student\v242\aisol\bin\winx64\Ansys.Solvers.Explicit.Launcher.exe -input ".\admodel_0.ad" -exd -double -machines localhost:4
Checking remote machine response
Problem accessing remote machine
Unable to create saved verbose file. Cannot write to C:\Program Files\ANSYS Inc\ANSYS Student\v242\aisol\bin\winx64\AutodynWrapperSavedVerbose.txt.

I tried to get LS-Dyna working in this setup, but had no time to actually run and debug it.

I use these versions:

2024 R2

Point Releases and Patches installed:

Ansys Service Pack 2024 R2.13235604
Discovery 2024 R2.13235604
Core WB Files 2024 R2.13235604
Ansys Dynamic Reporting 2024 R2.13235604
SpaceClaim 2024 R2.13235604
CFX (includes CFD-Post) 2024 R2.13235604
Chemkin 2024 R2.13235604
EnSight 2024 R2.13235604
FENSAP-ICE 2024 R2.13235604
Fluent (includes CFD-Post) 2024 R2.13235604
Polyflow (includes CFD-Post) 2024 R2.13235604
Forte (includes EnSight) 2024 R2.13235604
TurboGrid 2024 R2.13235604
ACIS Geometry Interface 2024 R2.13235604
AutoCAD Geometry Interface 2024 R2.13235604
Catia, Version 4 Geometry Interface 2024 R2.13235604
Catia, Version 5 Geometry Interface 2024 R2.13235604
Catia, Version 6 Geometry Interface 2024 R2.13235604
Creo Elements/Direct Modeling Geometry Interface 2024 R2.13235604
Creo Parametric Geometry Interface 2024 R2.13235604
Inventor Geometry Interface 2024 R2.13235604
JTOpen Geometry Interface 2024 R2.13235604
NX Geometry Interface 2024 R2.13235604
Parasolid Geometry Interface  2024 R2.13235604
Solid Edge Geometry Interface 2024 R2.13235604
SOLIDWORKS Geometry Interface 2024 R2.13235604
Speos 2024 R2.13235604
Aqwa 2024 R2.13235604
Autodyn 2024 R2.13235604
Material Calibration App 2024 R2.13235604
Customization Files for User Programmable Features 2024 R2.13235604
Mechanical Products 2024 R2.13235604
Motion 2024 R2.13235604
Academic Student 2024 R2.13235604