Ansys Learning Forum Forums Discuss Simulation Fluids Savonius 2D simulation, Cp increasing after stall point Reply To: Savonius 2D simulation, Cp increasing after stall point

oe23s006
Subscriber
 TSRT at 5th rev
 0.64.2053
 0.73.9721
 0.83.53
 0.93.227
 12.955
4th1.12.771
4th1.22.576

Sir I am calculating the average torque over one cycle. According to what you said, the graph should be coming according to experiment. So what could be the reason for the deviation after stall point (tsr=0.8). That is what I am not understanding