We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Savonius 2D simulation, Cp increasing after stall point › Reply To: Savonius 2D simulation, Cp increasing after stall point

October 9, 2024 at 10:30 am
oe23s006
Subscriber

 

Ok sir.

Top: velocity contour at TSR=0.6 after 5 revolutions. Botom: velocity contour at TSR=1.1 after 4 revolutions