We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › ANSYS AQWA – Questions on Froude Scaling › Reply To: ANSYS AQWA – Questions on Froude Scaling

October 1, 2024 at 6:11 pm
S.S.S.ShankaVasuki
Subscriber

Ah okay 

 

But in the time domain analysis for the full scale model I used a time step of 0.1s and the run time of 1000s.

 

I have used the same for the scaled down model as well. So my question is do I have to scales these down by sqrt(10) such the time step would be 0.03s and the duration of simulation would be 316s?

Â