We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Both Frequency and Time domain(transient) simulation in HFSS › Reply To: Both Frequency and Time domain(transient) simulation in HFSS

September 13, 2024 at 4:48 pm
sghose
Subscriber

Hello Jason,

Thanks for your reply. I have gone through the pdf of "HFSS Transient". I am working on YIG (Yttrium Iron Garnet) which is a magnetic material that is not a diagonal anisotropic material, I guess. 
 
 
1) When I selected "Transient Simulation" from the solution type and then it automatically removed the "Magnetic Biasing" from the "Excitation" tab. And I wanna do it in presence of frequency domain at the same time for 5 GHz.
 
So, is there any other way to do both frequency and time domain analysis at a time? Or, do I need to use another time domain software like CST for that?
 
Any suggestion would be appreciated.