We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum Forums Discuss Simulation Photonics – Chinese 仿真区域位置的设置 Reply To: 仿真区域位置的设置

Guilin Sun
Ansys Employee

基底是均匀介质,没有必要很厚,只需要保证PML位于均匀网格即可,一般半个波长即可。

建议光源靠近结构;

监视器问题不大,只要不在光源灰色区域即可。因为PML前面一般有半个波长左右的长度,所以监视器在哪里问题不大。