We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum Forums Discuss Simulation Photonics – Chinese 求问etch和折射率为1的区别 Reply To: 求问etch和折射率为1的区别

Guilin Sun
Ansys Employee

折射率为1的介质是只有空气,更准确地说是真空。

你这个柱子设置的折射率是1.4,当然不是空气,也不会与Etch一样的结果啊。你用折射率监视器看看。