We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › 3D Design › Not able to create Force Monitor in Discovery 2024 R2 › Reply To: Not able to create Force Monitor in Discovery 2024 R2

July 31, 2024 at 12:20 pm
Shivaansh Adlakha
Subscriber

As far as subtracting the geometry is concerned, I did create the enclosure through the Simulation tab>External Volume