We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Convergence problem when going from 2023 R1 to R2 › Reply To: Convergence problem when going from 2023 R1 to R2

July 24, 2024 at 1:38 pm
dlooman
Ansys Employee

Around that time we made the Seebeck effect strongly coupled.  This is probably the issue.  Set KEYOPT(2)=1 to go back to load vector coupling.  LNSRCH,ON is frequently helpful in these analyses.