Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.
fengyang
Subscriber

目前仿真的波长太长了,不建议这么长。

可尝试以下操作试试,

1提高仿真精度

2增加pml层数

3设置一个场监视器,看看是不是有地方的光能量特别集中,然后设置一个时间监视器放在特别集中的位置,看看对应波长的情况。发散一般是因为光能量没有降低到零导致的。

[bingo_chatbox]