We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › LS Dyna › “forrtl:severe (157) :Program Exception” › Reply To: “forrtl:severe (157) :Program Exception”

July 3, 2024 at 7:25 am
Tim T
Subscriber

There are two parts in this simulation. I set "CONTACT_AUTOMATIC_SINGLE_SURFACE "for part1. When part1 touches itself, "forrtl:severe (157) :Program Exception" appears.