We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › The flow from the inlet did not pass through the golf ball in the rotating domai › Reply To: The flow from the inlet did not pass through the golf ball in the rotating domai

May 17, 2024 at 2:37 pm
Rob
Forum Moderator

OK, so nonconformal interface between the two zones. Check the mass flux on both interface surfaces and also plot pathlines down the centreline (release from a line) so we can see what's going on.Â