We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum Forums Discuss Simulation LS Dyna Error during restart of dam analysis example Reply To: Error during restart of dam analysis example

Tonmoy
Subscriber

Hello Roque,

The problems, as Dr. Basu has pointed out, are occurring due to the use of MPP. Change the last terminal command from

lsdyna -dis -np 8 i=dam-transient.k r=stat.d3dump01 gminp=aux.gmbin jobid=trn

 


to

lsdyna -dis -np 8 i=dam-transient.k n=stat.d3full01 gminp=aux.gmbin jobid=trn

and I can confirm that it will work like a charm. The parameter n takes the restart input for MPP instead of the traditional r used for SMP.

- Tonmoy.