Reply To: Number of escaped and trapped particles at each time step

[Bill Hsu]

Thanks for your reply, Rob!

So if I need the DPM summary at every time step, the only way to do that is to stop the calculation every time step and get the DPM summary? I did this before, my total flow time was 30 min and I stopped the calculation every 5 min and ran the DPM summary report, so I could get the number of escaped and trapped particles every 5 min.  Is there any more efficient way?  Reports in Fluent can write the report in a certain frequency, but in the particle track, I didn't see the frequency setting.