We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › No friction at inlet › Reply To: No friction at inlet

N. M.
Subscriber

The first figure depicts the vectors, while the second one illustrates a plot of the velocity along an axis situated in the YZ plane, extending from one end to the other of the circular inlet (Figure 3, the yellow line at the top). As evident, the velocity begins at 0 at the inlet boundary and reaches the specified value of 980 m/s in the central region of the inlet. My objective is to ensure that the velocity maintains a constant value of 980 at every point within the inlet.

 

Thank you.